Free no obligation quote. All enquiries are welcome.
  • Get in Touch
GMT Plumbing and Heating Solutions
  • Services
  • Gallery
  • Contact
  • Request a Quote
  • Request a Quote

Gallery

❄️ condensate ❄️ Customer had moved into ❄️ condensate ❄️ Customer had moved into this house and wanted the boiler servicing, upon arriving I saw the condensate was just all wrong!! ❄️ not insulated correctly ❄️ no air gap going into the rainwater pipe ❄️ Undersized through the wall ❄️ Not insulated through the wall The only answer @condensate_pro_uk Advised the customer on what needed doing and set about doing it correctly!! Condensate pro is a really good bit of kit! It’s so easy to install and it’ll save you time in the long run! Once it’s installed you know that’s never freezing and you’re not getting a phone call in the heights of winter when it’s silly season that their boilers not working because of a frozen condensate!! #condense #condensate #condensatepro #condensateproblems
🚿 Bathroom Adaptation 🚿 Customers needs cha 🚿 Bathroom Adaptation 🚿 Customers needs changed and it was time to revamp the bathroom and make it suit their needs. We removed the bathroom suite, removed the tiles and with this it ripped all the plasterboard off back to brickwork. The thin stud work plasterboard come off too.. We dot and dabbed the external walls and reboarded the stud walls. We then had a nice blank canvas. Removing the boxing we discovered the soil pipe wasn’t in the place we anticipated it to be so we had to cut it further back and re route it to allow the toilet to sit against the wall and in a better position. 1st fix hot colds and waste pipes for the vanity unit and the shower tray and 1st fix for towel radiator. We tiled the floor and then shower boarded all the walls. Once all was boarded it was time to add the finishing touches We installed the 600 wide grey vanity unit with drawers, installed the RAK close coupled toilet, the 1000 x 900 shower enclosure, dual thermostatic shower, towel radiator and the two mirrors. The room has transformed into a room that’s better for the customers needs and they are really happy with how it’s all turned out. #bathroom #bathroomrenovation #plumbing
❄️ Condensate pro ❄️ I had an enquiry to ❄️ Condensate pro ❄️ I had an enquiry to rectify issues that had been flagged up by BG when they come to service the customers boiler.. One of them was the condense pipe… • The elbow wasn’t glued • It was undersized • it was skyhooked to the soil pipe • It was installed to manufactures instructions!! So we ripped it out and installed @condensate_pro_uk Really rate and like this product! It’s easy to install, and once installed you know that condense is never failing! No frozen condense in the winter, no call backs, installed to manufactures instruction… done and dusted! #condense #frozencondensatepipes #condensate #condensatepro
💧Aquabion 💧 Here is a few photos of the ins 💧Aquabion 💧 Here is a few photos of the installation for a customer I done the other day, she lived in a hard water area and was fed up of having to replace her kettle all the time. Do you live in a hard water area? Do you have limescale build up on your taps? Do you have to keep replacing your kettle? Has your water flow gradually reduced? There is only one answer AQUABION It’s so small… it’s so simple… and it’s sooo effective!!. @aquabion_uk @aquabion_al @aquabion_group #plumbing #aquabion #aquabionuk #limescale
Just a little tip when the external stop tap full Just a little tip when the external stop tap full to the brim of soil.. Thought I would make a reel to show others.. didn’t go as planned 😂😂… but you get the jist #plumbing #plumbingproblems #plumbinglife #GMTtips
💧 Indirect Hot water cylinder change 💧 Cust 💧 Indirect Hot water cylinder change 💧 Customers immersion kept tripping, tried changing the stat over, no good, tried taking the immersion out, no good just buckled the cylinder.. New cylinder it was.. Let’s just say getting to the coil connections was tricky even with my long arms!.. there wasn’t much play on the return pipework, so for creative and installed a double skinned baseboard ontop of the original timbers the old cylinder was sat on… this gave us the correct pipe centre and I could adjust the flow pipework. Installed a new lever valve, having only 1 22mm elbow on the van I had to have my best bending skills and bend the inlet pipework with a 90 and two offset bends. Installed the new Tesla immersion, renewed the flex and clipped it neatly to the wall. Fiddly one but overall a good job done 😌🔥 #gledhill #hotwater #hotwatercylinder #plumbing
🚿 Cloakroom renovation 🚿 Customer wanted to 🚿 Cloakroom renovation 🚿 Customer wanted to make more of what was a very big cloakroom for a toilet and basin. We removed the suite, removed the floor tiles which took up a fair bit of concrete (which was self levelled later on), exposed the heating pipes and then ran them into the stud wall for the new towel radiator positioning. Installed a false wall behind the shower which housed the pipework and electrics for the shower. The wall hung cage for the toilet, the basin hot cold and waste. First fixed the plumbing and then we wedi boarded it ready for tiling. Tiled the shower are floor to ceiling and the rest of the boxing, leaving the rest of the walls to be painted in the customers choice. We installed a 1600 stone resin shower tray on legs and ran the waste to the mcalpine drain connector with a boss adaptor. Once tiled and grouted it was on to installing the ideal standard wall hung toilet, ideal standard cloakroom basin, Merlyn 10mm shower screen, Mira electric shower and a 1600 x 600 white towel radiator with corner valves. The room has completely transformed and is ready for the customer to paint and the flooring to be installed! @merlynshowering @mirashowers @idealstandardofficial @toppstilestrade #bathroomrenovation #bathrooms #plumbing
🔥 combi to combi 🔥 Customer had been with a 🔥 combi to combi 🔥 Customer had been with a temperamental boiler for a while and it was slowly dying!.. Removed the existing combi, cut back all the pipework, hung the boiler jig, installed 2 butterfly valved flushing points, system filter, shock arrestor, scale reducer. Upon installing the condense to the rainwater pipe we discovered the drain was blocked so we had to get our hands dirty and unblock it 😅. Once all piped up we filled the system up and then done a @thoroughflush on then system, checked the system water with a @adey_pro pro checker. Commissioned the boiler finished it off with @stickersandthat stickers 😬 and the customer now has an efficient working boiler 😅🔥🔥 #worcesterboschprofessional #talon #pipesnug #thoroughflush #heatingengineer #heating #combi
🔥 system conversion 🔥 Customer wanted to ge 🔥 system conversion 🔥 Customer wanted to get rid of the BBU and hot water cylinder and have a combi. Tried working out the best location for the boiler in the house and the airing cupboard was the best. Drained down the whole system, removed the tanks in the loft (some people don’t, but we like to make sure any redundant is out) Removed the fire and BBU cut the old pipework back and installed some plywood to stop draughts coming down. Customer is hoping to have a log burner in there at some point. Removed the hot water cylinder and redundant pipework, hung the boiler jig on the wall and got started with piping it up. Installed an inline scale reducer, Worcester system filter, shock arrestor and two butterfly valves for flushing. We installed a @worcesterbosch Worcester 4000 30KW combi which was range rated down and installed a comfort 2 wireless programmable room stat. We installed a @grundfos conlift 1 condense pump running up into the loft and connecting on to the soil pipe. We installed a @ratechltd hotun tundish (very impressed with the quality of their product) Installed new lead slate, vertical flue, flue elbows and bracketed it correctly so supported will. Wired up the boiler and condense pump!. We could now fill up and flush. We used the trusty @thoroughflush to flush the system out and you can tell from the pictures how bad it was! Once was happy the water was running clear we @adey_pro Adey ProCheck to check system water levels. After all this it was time to commission and hand over to the customer leaving all documents in @stickersandthat document folder 🤩 Products used @ratechltd - hotun tundish @thoroughflush - flushing equipment @grundfos - conlift 1 @lawtontubes - copper pipe @talon.uk - clips @worcesterbosch - Worcester 4000 30KW combi @stickersandthat - stickers & document folder #talon #hotun #worcesterboschprofessional #worcesterboschboilers #heating #heatingengineer #plumbproud #combi
Heat only replacement that kept on giving!! Custo Heat only replacement that kept on giving!! Customers boiler was on its last legs, drained down the heating system removed the old boiler. Hung a Baxi 816, adjusted the pipework to suit installing a Adey system filter, connected the gas. Filled the system up and checked for leaks. We moved the room stat as the location was ridiculous and installed a Google nest 3rd gen thermostat. Then the issues started.. • This boiler was slightly longer so couldn’t connect on to the condense buried in wall, so I had to run new to the kitchen sink through worktop. • The wiring was completely wrong and had to be ripped completely out and installed a Wago L32 wiring centre • Went to fire up and wouldn’t fire correctly… after inspection the heating 2 port valve had gone… we then replaced that. • We noticed a lot of water in the airing cupboard floor… after inspection noticed that the hep2o self sealing trap for the D2 was split and leaking, so we ripped that out and replaced. •The tundish was dripping and turned out to be the expansion vessel sealed system PRV passing… we then had to replace that. The terminology “open a can of worms” definitely stood here! But we didn’t let it phase us and carried on and now the customer had a brand new boiler working correctly and efficiently 🔥🔥
Boiler breakdown resulting in replacement Advise Boiler breakdown resulting in replacement Advised customer of the multiple parts needed replacing and the costings and they went for the replacement. Important to get your boiler serviced annually and serviced correctly, had it there would have been more life in the existing boiler! #reel #worcesterbosch #worcesterboschprofessional #thoroughflush #stickersandthat #heatingengineer #heating #boilerreplacement
🔥 Full install 🔥 Customer had storage heate 🔥 Full install 🔥 Customer had storage heaters downstairs and no heating at all upstairs. Part of their house renovation was to install a new heating system! The house has multiple bathrooms and a lot of hot water draw off so the best designed system for the property was a system boiler and unvented cylinder… the next challenge was where was it going to go in the house… the best place was the loft but I could barely fit up there let alone all the stock. A new bigger loft hatch was installed and progress could start. I installed a sturdy platform for the cylinder and pipework to sit on and a false wall for the boiler to hang on. Removed the old CWST and HW cylinder which was going to be the main run for the pipes, I installed two flush points so can flush the system!. Hang new convector radiators and installed flow return hot cold balanced cold throughout the property!. Once the system was all piped up it was now to @thoroughflush the system! And I was very surprised at how rusty the water was considering new rads and copper pipes! Once happy all flushed was time to crack on with the lagging and no better tool than the @lagit_uk. Range rated the boiler down as sized the boiler for future developments, commissioned the boiler filled out benchmark book, boiler guarantees and took pictures of the final product! All wired up by @deas_electrical 👌🫶🏻 Products used @worcesterboschprofessional @talon.uk @ratechltd @lagit_uk @lawtontubes @thoroughflush @stickersandthat #plumbproud #plumbing #heating #heatingengineer #worcesterbosch #worcesterboschprofessional #talon #unventedcylinder #unventedhotwater #idealcylinders #properincopper
It’s not always big heating system or complex ba It’s not always big heating system or complex bathrooms… sometimes it’s back to basics. When the customer had the basin installed she wasn’t happy with the pipework the previous people done… so they boxed it in… and I must say they lashed both in 😂. She has never been happy with it and wanted to get it changed.. I removed the existing basin and boxing and installed a vanity cloakroom basin. I moved it over slightly as was tight when sat on the toilet… I tidied the pipework up even installed a @talon.uk 35mm pipe cover around the waste pipe which had to be cut through the shelf. It’s the little things like that that go a long way! Move the shelf and mirror over so all in line siliconed up and we’re done 👌👌
🛖 Barn Bathroom 🛖 After first fixing the ba 🛖 Barn Bathroom 🛖 After first fixing the bathroom last year it was time to make their dream happen. The customer has always wanted a bathroom in their barn so when they come back from muddy bike rides and muddy walks with the dogs they can get a shower and be nice and clean going into the house. Careful planning was achieved so it fitted nicely into the room they had in mind. I battered the wall off where the pipes were, installed a studwork all the way round (creating the room), installed the door liner. Plasterboarded the whole room, installed a 1200 x 800 shower tray on legs because of the fall I had on the waste pipe. Multi panel showered board the whole room (which had it challenges getting the boards in such a sized room), installed a wall hung Instinct Espasda willow vanity unit and basin, Installed a Instinct Espada close coupled toilet, 1200 x 600 chrome towel radiator, Merlyn IQ 1200 slider door, instinct thermostatic shower, tiled the floor in limestone tiles, sealed twice, grouted and done the final silicone up. What a transformation from an empty room, to a fully complete bathroom. All the stock was supplied from @mkm_gloucester , the tiles were from topps tiles. Customer is very happy and I’m more than pleased with how it’s turned out, always hard to visualise what the end product look like but this turned out better than ever imagined. @mkm_gloucester @multipanel_it @toppstilestrade #plumbing #plumbinglife #bathroom #bathroomrenovation
Went to a job to do a boiler service and upon arri Went to a job to do a boiler service and upon arriving I noticed rusting on the flue and when I took the front case off rust marks on the back of the boiler… I put my analyser inside the boiler and products of combustion was spilling out!!! So we informed the customer turned it off and issued a warning notice! (Never nice telling customer have to condem boiler, but I have a duty of care and better they have no heating than be dead from carbon monoxide poisoning) I priced up for a repair but I did warn them that untill I removed the HX and inspected the rusting damage behind it could be a complete write off with it rusted through. They didn’t want to repair the boiler with the age of it so they went for a replacement. I installed a new Vaillant ecotec plus 418, installed a new horizontal flue and extension correcting the horizontal flue making sure there was a fall, installed a flue bracket, Vaillant system protection kit done a system flush, installed a new DAB pump and checked the water quality. #vaillant #heatingengineer #heating
Customer was fed up of limescale causing problems Customer was fed up of limescale causing problems in their house…. The solution? Aquabion, I installed it straight after the stop tap and this provided a whole house protection. Why use Aquabion well it’s simple…. NO SALT, NO SERVICE, NO FILTER, NO WASTAGE, NO POWER. If you live in a hard water area then Aquabion is the solution 👌 @aquabion_group @aquabion_uk @aquabion_al

No job too big or too small

Free no obligation quote. All enquiries are welcome.
Request a Quote
gmtplumbingandheating@gmail.com
07851 008878
Checkatrade
Gas Safe Logo
gmtplumbingandheating@gmail.com
07851 008878
Checkatrade
Gas Safe Logo
© 2025 GMT Plumbing and Heating Solutions. All rights reserved